Clearance Center

Limited stock, priced to move.
In-stock items only!
All Sales Final & Non-returnable

Camshafts

Discontinued numbers

Wolverine Blue Racer

Small Block Chevy Mechanical Circle Track

Carrillo Rods

The lightest and strongest A-Beam Rod on the market. The Pro A-Beam Rod is made from Carrillo’s exclusive steel mixture of chrome/nickel/vanadium alloy  known as Carrilloloy. These rods are perfectly suited for engines that require low  reciprocating weight. All rods have WMC H-11  fasteners 220,000 PSI tensile. 

Rod Bolts

SBC H-BEAM RODS

S = CARR BOLT
H = WMC BOLT
>6 = 3/8 BOLT
>7 = 7/16 BOLT

Small Block Chevrolet - Large Journal Lightweight Taper A-Beam

HURRY!
Price while supplies last.
In-stock inventory only!

Small Block Chevrolet - Small Journal Lightweight Taper A-Beam

HURRY!
Price while supplies last.
In-stock inventory only!

Crankshaft

Dart Blocks

PRICED TO MOVE!
LIMITED INVENTORY!
ALL SALES FINAL ON DART!

Aluminum Ford Blocks

DART'S ALUMINUM RACE SERIES FORD BLOCKS ARE CAST FROM AIRCRAFT QUALITY 355-T6 ALLOY. ADDED DECK HEIGHT, SIAMESE BORES, ENLARGED WATER JACKETS, REINFORCED MAIN WEBS, ONE PIECE REAR MAIN SEAL AND REINFORCED BLIND TAPPED HEAD BOLT BOSSES. ALL THE STOCK ACCESSORIES BOLT ON WITHOUT MODIFICATIONS.

Iron Eagle Ford Blocks

DART'S CAST IRON FORD BLOCKS OFFER MANY IMPROVEMENTS OVER STOCK BLOCKS. •ADDED DECK HEIGHT •SIAMESE BORES •ENLARGED WATER JACKETS •REINFORCED BLIND TAPPED HEAD BOLT BOSSES •REINFORCED MAIN WEBS •ONE PIECE REAR MAIN SEAL •ALL STOCK ACCESSORIES BOLT ON WITH NO CHANGES

Pro Series "Little M" Iron Small Blocks

•TRUE HIGH PERFORMANCE BLOCK THAT CAN BE USED WITH STANDARD OFF-THE-SHELF SMALL BLOCK COMPONENTS •CAST FROM PREMIUM HIGH-STRENGTH IRON AND BEEFED UP IN ALL THE CRITICAL AREAS •STANDARD DECK HEIGHT, EXTRA-THICK CYLINDER WALLS •COMPETITION OILING SYSTEM •LIGHTENED AND 50MM CAM TUNNELS

SBC Aluminum Blocks

ENGINEERED FOR SERIOUS HP & PROFESSIONAL ENGINE BUILDERS

•95 LB TOTAL WEIGHT •SPREAD OIL PAN RAILS •TWO MAIN BEARING BORES •RAISED CAMSHAFT •STEEL FOUR BOLT MAIN CAPS

ALL SBC ALUMINUM BLOCKS AVAILABLE IN 3 DIFFERENT DECK HEIGHTS: 9.025, 9.325, 9.500

SBC Iron Eagle

Dart Cylinder Heads

PRICED TO MOVE!
LIMITED INVENTORY!
ALL SALES FINAL ON DART!

CNC DART ALUMINUM SBC PRO 1 23° CYLINDER HEADS

All heads available bare or assembled. Port volume 200cc, extra thick deck, chamber volume 64cc with angle plug, manganese bronze valve guides, hardened intake and exhaust seats.

STRIKE FORCE R SERIES CNC HEADS

" Big Performance Bang for your Buck!"

High Velocity 225cc Runner, 300+CFM with 2.055 valve, Superior combustion chamber, 75% exhaust flow

Iron Platinum Heads

•INCREASED AIR FLOW •HARDENED EXHAUST SEATS •PHOSPHOROUS EXHAUST GUIDES •MANGANESE INTAKE GUIDES •5 ANGLE COMPETITION VALVE JOB ON INTAKE •FULL RADIUS ON EXHAUST •ACCEPTS MOST STOCK BOLT-ON COMPONENTS

VALVE TRAIN KITS WITH ANY OF THE DART IRON PLATINUM SB CHEVY HEADS KIT CONTENTS INCLUDE: 8 INTAKE VALVES, 8 EXHAUST VALVES, VALVE SPRINGS SET, VALVE LOCKS, GUIDEPLATES, CHROME MOLY RETAINERS, ROCKER STUDS, PREMIUM VALVE SEATS.

SEE VALVE TRAIN KITS SECTION FOR PRICING

LS1 Cylinder Heads

•HIGH FLOW PORTS WITH EFFICIENT COMBUSTION CHAMBERS •HEADS COME WITH 8MM VALVE, TRICK TITANIUM RETAINERS, VITON SEALS WITH BUILT-IN LOCATER/SHIM, AND HARDENED HEAT-TREATED BEAD LOCKS •STOCK VALVE ANGLES AND CENTERS •DRILLED AND TAPPED ACCESSORY HOLES •STOCK PORT LOCATIONS ALLOWS USE OF STOCK COMPONENTS

PBM VALVE TRAIN KITS WITH ANY PAIR OF LS1 DART HEADS, SEE VALVE TRAIN KITS SECTION FOR PRICING

Pro 1 SBC Heads

NEW "PLATINUM" PRO 1 ALUMINUM CYLINDER HEADS FOR SB V8'S DELIVER ADVANCED AIRFLOW TECHNOLOGY AT AN UNBEATABLE PRICE!

•CAST FROM VIRGIN 355-T6 AEROSPACE ALLOY FOR SUPERIOR STRENGTH & INTEGRITY •BOLT ON COMPATIBILITY STANDARD VALVE ANGLE AND SPACING ARE RETAINED, ACCOMMODATES ALL STOCK ACCESSORIES •MULTI-ANGLE INTAKE SEATS AND RADIUSED EXHAUST SEATS DRAMATICALLY INCREASE AIRFLOW •HARDENED EXHAUST SEATS ARE COMPATIBLE WITH UNLEADED GASOLINE •MANGANESE BRONZE VALVE GUIDES FOR EXTENDED CYLINDER HEAD LIFE

VALVE TRAIN KIT WITH ANY OF THE DART PRO 1 SB CHEVY HEADS. KIT CONTENTS INCLUDE: 8-INTAKE VALVES; 8 EXHAUST VALVES; VALVE SPRINGS SET; VALVE LOCKS; GUIDEPLATES; CHROME MOLY RETAINERS; ROCKER STUDS; PREMIUM VALVE SEATS; SPRING CUPS;

SEE VALVE TRAIN KITS  SECTION FOR PRICING

Erson

These are discontinued Erson items. Get them while you can.

Chrysler Big Block Hydraulic Flat Tappet

383-440 CID Engines 1958-1978
Single Bolt

Chrysler Small Block Hydraulic Flat Tappet

273 & 360 CID Engines 1964-1987
318 CID Engines 1967-1986 (excluding roller applications)
Single Bolt

Guide Plates

Pushrods 3/8

Sold in complete sets only!

Pushrods 5/16

Sold in complete sets only!

Retainers

Rocker Arms - Forged Aluminum

Erson's Aluminum-Roller Rocker Arms are made from 2014-T6 aircraft quality forgings to guarantee the greatest rigidity and durability in the performance industry. All steel components, including needle bearings are made from aircraft quality, high-alloy steels. A larger roller on the valve tip reduces scrubbing action and improves valvetrain geometry. New larger, specially-designed trunions also improve geometry, decrease the possibility of failure, and help ensure easy installation.

Springs

Gaskets

Jiffy-Tite

Quick-Connect Fluid Fittings

NEW- Bare Cylinder Heads

**OVERSTOCK CLEARANCE***
NEW bare cylinder heads

PTP/Richmond Ring & Pinion gears

Very limited quantity in stock..

Ram HDX Clutch Kits

HDX pressure plates with their substantially higher clamping pressure, provide the capacity to handle 50% increase in torque load and even higher increases in horsepower over 5000 RPM.HDX pressure plate castings are made from explosion resistant ductile iron and meet SFI safety standards.

HDX kits include the pressure plate, disc, release bearing, and alignment tool.

Willy's Carburetor & Dyno Shop Tools