Online Store

Hide Menu

Site Maintenance under way..
Sorry for the inconvenience..

SBC 1955-1995 NON-ROLLER


262/265/267/283/302/305/307/327/350/400 CID V8
NON-ROLLER

Eliminator Hydraulic


Hot Street and Strip, these cams require modifications, stall converters, gears, headers, raised compression, larger carbs. Some applications are suited for nitrous and super charge use. Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. Will have lower vacuum than stock.

NOTE: All Chevrolet small block camshafts may be used in the 1955-56 Engines if late model cam bearings are used.
NOTE: These camshafts CANNOT be used in 1987 and later 305 & 350 V8 Engines originally produced using roller lifters.

NOTES:
a) Preferred latest computer design concepts in each application.
c) This cam may require conversion to an adjustable valve train.
These performance cams are legal only for pre-1966 California and pre-1968 federally certified cars; or for off-road and racing vehicles which may
never by used upon a highway.

ENERGY PLUS Mechanical Series Flat Tappet-Eliminator


Hot Street and Strip, these cams require modifications, stall converters, gears, headers, raised compression, larger carbs. Some applications are suited for nitrous and super charge use. Rough idle quality. Mid to high rpm torque and horsepower. For serious
racing only. Need proper selection of rear axle ratio and improvements in carburation and exhaust systems. For use with manual transmission or automatic. Will not have enough vacuum for power accessories.

HYDRAULIC FLAT TAPPET

Mechanical Flat Tappet

Stock#DescriptionPriceQuantity
ERSE110822
specs>>
 $160.92

Street Fighter Hydraulic


This range of camshafts offer great power increase over stock cams, some are suited for nitrous, engine modifications will further enhance performance. Fair idle quality. Good low to mid-range torque and HP. Will work with stock or modified engine. Can use
stock rear end gears. For use with manual or auto transmission.

NOTE: All Chevrolet small block camshafts may be used in the 1955-56 Engines if late model cam bearings are used.
NOTE: These camshafts CANNOT be used in 1987 and later 305 & 350 V8 Engines originally produced using roller lifters.

NOTES:
a) Preferred latest computer design concepts in each application.
c) This cam may require conversion to an adjustable valve train.
These performance cams are legal only for pre-1966 California and pre-1968 federally certified cars; or for off-road and racing vehicles which may
never by used upon a highway.

Torque Master Hydraulic


These cams are ideal for Trucks, RV’s, cars. Good idle quality. Low rpm torque. Will work with stock or slightly modified engine. Stock rear end gears. Manual or auto transmission.

NOTE: All Chevrolet small block camshafts may be used in the 1955-56 Engines if late model cam bearings are used.
NOTE: These camshafts CANNOT be used in 1987 and later 305 & 350 V8 Engines originally produced using roller lifters.

NOTES:
a) Preferred latest computer design concepts in each application.
c) This cam may require conversion to an adjustable valve train.
These performance cams are legal only for pre-1966 California and pre-1968 federally certified cars; or for off-road and racing vehicles which may
never by used upon a highway.